Change info prints

include/myDisplay.h

@@ -5,6 +5,9 @@ enum DISPLAY_POSITION {
   POSITION_RIGHT,
 };
 
+#define LCD_COLUMNS 16
+#define LCD_ROWS 2
+
 void setupDisplay();
 void showNumber(uint8_t number);
 void showInsideInfo(const char* text);

include/version.h

@@ -1,9 +1,9 @@
 #ifndef BUILD_NUMBER
-  #define BUILD_NUMBER 39
+  #define BUILD_NUMBER 41
 #endif
 #ifndef VERSION
-  #define VERSION "v0.1.39 - 2023-11-28 18:19:04.992246"
+  #define VERSION "v0.1.41 - 2023-11-28 18:30:13.789845"
 #endif
 #ifndef VERSION_SHORT
-  #define VERSION_SHORT "v0.1.39"
+  #define VERSION_SHORT "v0.1.41"
 #endif

src/myOTA.cpp

@@ -11,29 +11,34 @@
 
 void setupOTALocal() {
   Serial.println("Booting");
+  char infoBuffer[LCD_COLUMNS];
+  sprintf(infoBuffer, "W:%s", WIFI_SSID);
+  showInsideInfo(infoBuffer);
   WiFi.mode(WIFI_STA);
   WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
   while (WiFi.waitForConnectResult() != WL_CONNECTED) {
     Serial.println("Connection Failed! Rebooting...");
+    showInsideInfo("W:Failed");
     delay(5000);
     ESP.restart();
   }
+  showInsideInfo("W:Connected");
   ArduinoOTA.onStart([]() {
     Serial.println("Start");
-    showInsideInfo("[LU] Start");
+    showInsideInfo("LU:Start");
   });
   ArduinoOTA.onEnd([]() {
     Serial.println("\nEnd");
-    showInsideInfo("[LU] Done");
+    showInsideInfo("LU:Restarting..");
   });
   ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
-    Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
-    char infoBuffer[16];
-    sprintf(infoBuffer, "[LU] P:%u%%", (progress / (total / 100)));
+    Serial.printf("Progress:%u%%\r", (progress / (total / 100)));
+    char infoBuffer[LCD_COLUMNS];
+    sprintf(infoBuffer, "LU:P:%u%%", (progress / (total / 100)));
     showInsideInfo(infoBuffer);
   });
   ArduinoOTA.onError([](ota_error_t error) {
-    Serial.printf("Error[%u]: ", error);
+    Serial.printf("Error[%u]:", error);
     if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
     else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
     else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
@@ -42,7 +47,7 @@ void setupOTALocal() {
   });
   ArduinoOTA.begin();
   Serial.println("Ready");
-  Serial.print("IP address: ");
+  Serial.print("IP address:");
   Serial.println(WiFi.localIP());
 }
 
@@ -54,21 +59,21 @@ void handleOTARemote() {
   WiFiClient client;
   
   Serial.println("Updating from remote...");
-  showInsideInfo("[RU] Start");
+  showInsideInfo("RU:Start");
   t_httpUpdate_return ret = ESPhttpUpdate.update(client, "http://patient.bendtherules.in/build/esp12e/firmware.bin", VERSION_SHORT);
   switch(ret) {
     case HTTP_UPDATE_FAILED:
-      Serial.print("[update] Update failed. Reason - ");
+      Serial.print("update:Update failed. Reason - ");
       Serial.println(ESPhttpUpdate.getLastErrorString());
-      showInsideInfo("[RU] Failed");
+      showInsideInfo("RU:Failed");
       break;
     case HTTP_UPDATE_NO_UPDATES:
-      Serial.println("[update] Update no Update.");
-      showInsideInfo("[RU] Skip");
+      Serial.println("update:Update no Update.");
+      showInsideInfo("RU:Skip");
       break;
     case HTTP_UPDATE_OK:
-      Serial.println("[update] Update ok."); // may not be called since we reboot the ESP
-      showInsideInfo("[RU] Done");
+      Serial.println("update:Update ok."); // may not be called since we reboot the ESP
+      showInsideInfo("RU:Done");
       break;
   }
 }

versioning

@@ -1 +1 @@
-39
+41